| 锻打法兰是管子与管子相互连接的零件 |
| 添加时间：2018/6/25 14:34:22 浏览次数： |
| 锻打法兰是管子与管子相互连接的零件，连接于管端。锻打法兰上有孔眼，螺栓使两法兰紧连。锻打法兰间用衬垫密封。锻打法兰管件(flanged pipe fittings)指带有锻打法兰(突缘或接盘)的管件。它可由浇铸而成(图暂缺)，也可由螺纹连接或焊接构成。法兰连接(flange，joint)由一对法兰、一个垫片及若干个螺栓螺母组成。垫片放在两法兰密封面之间，拧紧螺母后，垫片表面上的比压达到一定数值后产生变形，并填满密封面上凹凸不平处，使连接严密不漏。法兰连接是一种可拆连接。按所连接的部件可分为容器法兰及管法兰。按结构型式分，有整体法兰、活套法兰和螺纹法兰。常见的整体法兰有平焊法兰及对焊法兰。平焊锻打法兰的刚性较差，适用于压力p≤4MPa的场合；对焊法兰又称高颈法兰，刚性较大，适用于压力温度较高的场合。 The forging flange is a part of the pipe and pipe connected to each other, and is connected to the pipe end. There are holes on the forging flange, and bolts make the two flanges tightly connected. The forging flanges are sealed with a cushion. Forged flange pipe fittings (flanged pipe fittings) refer to fittings with forged flange (flange or flange). It can be made from casting (temporarily missing) or threaded or welded. Flange connection (flange, joint) consists of a pair of flanges, a gasket and several bolts and nuts. The gasket is placed between the cover of two methods, and after tightening the nut, the surface of the cushion has a certain amount of deformation, and fills the dense cover with a concave and uneven place to make the connection tight. The flange connection is a detachable connection. It can be divided into container flange and pipe flange according to the connecting parts. According to the structural type, there are integral flanges, looper flanges and threaded flanges. Common flange has plain welding flange and butt welding flange. The rigidity of the flanged flanges is poor, which is suitable for the situation of pressure P < 4MPa >; the welding flange is also called the high neck flange, and the rigidity is large, and it is suitable for the situation where the pressure temperature is high. |
| 上一页 锻造法兰 |
| 下一页 铸造法兰结构形式 |
Copyright © 技术支持：遨游网络