| 在机械设计中法兰的作用 |
| 添加时间：2017/5/26 14:35:43 浏览次数： |
| 在机械设计中法兰的作用 The role of flanges in mechanical design 法兰是一种盘状零件，法兰都是成对使用的，在管道工程中最为常见。在管道工程中，法兰主要用于管道的连接。在需要连接的管道，各种安装一片法兰盘，低压管道可以使用丝接法兰，4公斤以上压力的使用焊接法兰。 Flanges are a type of disc and the flanges are used in pairs, most commonly in pipeline engineering. In the pipeline project, the flange is mainly used for the connection of the pipe. In the pipe that needs to be connected, all kinds of installation flange, low pressure pipe can use the silk flange, 4kg above pressure of welding flange. 水泵和阀门，在和管道连接时，这些器材设备的局部，也制成相对应的法兰形状，也称为法兰连接。 凡是在两个平面在周边使用螺栓连接同时封闭的连接零件，一般都称为“法兰”，如通风管道的连接，这一类零件可以称为“法兰类零件”。 但是这种连接只是一个设备的局部，如法兰和水泵的连接，就不好把水泵叫“法兰类零件”。比较小型的如阀门等，可以叫“法兰类零件”。 Water pumps and valves, when connected to pipes, are locally made of these devices, also known as flanges, also known as flanges. Where there are two surfaces in the surrounding use of bolt connection closed connection parts at the same time, generally referred to as the "flange", such as ventilation pipe connections, this kind of parts can be called "flange parts". But this connection is only a part of a device, such as a connection between a flange and a pump, and it is not good to call the pump "flanged parts". Smaller valves such as valves can be called "flanged parts". 在管道工程中，法兰主要用于管道的连接。在需要连接的管道，各种安装一片法兰盘，低压管道可以使用丝接法兰，4公斤以上压力的使用焊接法兰。两片法兰盘之间加上密封点，然后用螺栓紧固。不同压力的法兰有不同的厚度和使用不同的螺栓。 In the pipeline project, the flange is mainly used for the connection of the pipe. In the pipe that needs to be connected, all kinds of installation flange, low pressure pipe can use the silk flange, 4kg above pressure of welding flange. Seal points between two flanges, then bolted with bolts. Different pressure flanges have different thickness and different bolts. |
| 上一页 法兰是怎样一种连接方式 |
| 下一页 平焊法兰的工艺流程 |
Copyright © 技术支持：遨游网络